Features
Smooth surface, high gloss, little laminated striation.
Wide applicable temperature range.
Toughness, real silk texture.
Silk PLA are close to standard PLA in material properties but it’s tougher and glossier than PLA.
Colors
Dual-Color Silk PLA:Black & Purple/Black & Dark Gold/Black & Red/Black & Rose/Black & Dark Green/Rose Red & Light Blue/Yellow & Green/Blue & Green/Gold & Purple/Gold & Silver/Gold & Red Copper/Red & Green
Application
Beginners and DIY players.
Arts and crafts, 3D printing services.
Groups having high requirements about the surface expression of prints.
PLA Filament Technical Specification
Filament Diameter: 1.75mm
Tolerance: ±0.03mm
Printing Temperature: 190°C-220°C
Heated Bed Temperature: 45-60°C
Printing Speed: 30－90mm/s
Basic Parameters
Silk PLA Basic Parameter
| physical properties： | Typical Value: | Method： |
| Density(g/cm3) | 1.24g/cm³ | GB/T 1033-86 |
| Melt Flow Index(g/10min) | 5-7 | ASTM D-1238 (190℃/2.16Kg) |
| Tensile Strength(MPa) | ≥50 | ASTM D-638 |
| Elongation at Break(%) | ≥20 | ASTM D-638 |
| Flexural Strength(MPa) | ≥55 | ASTM D-790 |
| Flexural Modulus(MPa) | ≥1700 | ASTM D-790 |
| IZOD Impact Strength(kJ/㎡) | ≥7 | ASTM D-256 |
| Heat Distortion Temperature（℃，0.45MP） | 52 | GB/T 1634.2-2004 |
