Product Features
Having higher toughness than PLA.
Having higher hardness than PLA.
The impact strength is more than 30 times that of standard PLA.
Elongation at break is more than 50 times that of standard PLA.
Application
Suitable for prints (such as hook) having high requirements about the hardness and strength of filaments and for that having strong heat-resistance (such as transparent lampshade).
Technical Specification
Filament Diameter: 1.75mm
Tolerance: ±0.03mm
Printing Temperature: 230°C-250°C
Heated Bed Temperature: 70-85°C
Printing Speed: 30-80mm/s
Shortcomings
PETG is relatively easy to have stringing issues and requires high-temperature printing. It also has certain requirements about the performance of printers.
Basic Parameters
PETG Basic Parameter
| Physical Properties | Typical Value | Method |
| Specific Gravity [g/cm3 ] | 1.27 | ISO 1183 |
| Moisture Absorption 24 h [%] (2) | / | / |
| Moisture Absorption 7 day [%] (2) | / | / |
| Moisture Absorption 4 weeks [%] (2) | / | / |
| Heat Deflection Temperature (0,45MPa) | 72.9 | ISO 75 |
| Tensile Yield Strength Filament [MPa] | 51 | ISO 527-1 |
| Explain | / | / |
| (1) 2.16kg; 210℃ | / | / |
| (2) 28℃; humidity: 37% | 55 | ISO 75 |
Mechanical Strength of PETG Standard Printed Objects
| Property / Print Direction | Horizontal | Vertical X,Y Axis | Vertical Z Axis | Method |
| Tensile Modules [GPa] | / | / | / | ISO 527-1 |
| Elongation at Yield Point [%] | 37 | / | ISO 527-1 | |
| Impact Strength Charpy (2) [kJ/m2 ] | 10 | / | ISO 527-1 | |
| (1) 1. Used Printer Type 2. Used Slice Software 3. Slice Parameter, Layer Height, Fill Ratio Printing Speed, Top Layer Number, Bottom Layer Number | 1. Eryone Thinker SE/ER-20 2.Cura/Prusa Slicer 3.205 ℃ ， 0.2mm,100%, 50mm/s, 5,5 | / | / | |
| (2) Charpy unnotched, edgewise direction of flow according to ISO 179-1 | / | / | / | Place it according to the left picture, use slice software and print it. |
