Features
PLA + filament using a special anti-printing plug technology, using a special structure of dendritic macromolecules to modify the material matrix, in addition to basically maintaining the original PLA performance, greatly improving the toughness of the material, supplies are not easy to break, printing more smoothly, no warp cracking and other problems, and printing the surface of the parts delicate.
Application
Machinery, electronic appliances, automobiles, decorative parts, COSPLAY etc.
Technical Specification
Filament Diameter: 1.75mm
Tolerance: ±0.03mm
Printing Temperature: 190－230℃
Heated Bed Temperature: 0-60°C
Printing Speed：30-90mm/s
Basic Parameters
PLA+ Basic Parameter
| physical properties： | Typical Value: | Method： |
| Density(g/cm3) | 1.27g/cm³ | GB/T 1033-86 |
| Melt Flow Index(g/10min) | 5-7 | ASTM D-1238 (190℃/2.16Kg) |
| Tensile Strength(MPa) | ≥63 | ASTM D-638 |
| Elongation at Break(%) | ≥18 | ASTM D-638 |
| Flexural Strength(MPa) | ≥70 | ASTM D-790 |
| Flexural Modulus(MPa) | ≥1900 | ASTM D-790 |
| IZOD Impact Strength(kJ/㎡) | ≥9 | ASTM D-256 |
| Heat Distortion Temperature（℃，0.45MP） | 55 | GB/T 1634.2-2004 |
