Product Features
1.Environmentally-friendly, no odor, nontoxic.
2.High intensity, bright and clear color.
3.Low shrinking percentage and hardly curl.
4.Suitable for 99% common-used FDM 3D printers
Application and Target Audience
Any occasion without special requirements, 3D printing groups at all levels.
PLA Filament Technical Specification
Filament Diameter: 1.75mm
Tolerance: ±0.03mm
Printing Temperature: 190°C-220°C
Heated Bed Temperature: 55-70°C
Printing Speed: 30-100mm/s
Basic Parameters
PLA Basic Parameter
| Physical Properties | Typical Value: Standard Value | Method: Standard |
| Peak Melt Temperature | 167±5℃ | ISO 11357 |
| Glass Transition Temperature | 55-60 | ISO 11357 |
| MFR [g/10min] (1) | 7-15 | ISO 1133 |
| MVR [cm3/10 min] (1) | / | ISO 1133 |
| Specific Gravity [g/cm3 ] | 1.24 | ISO 1133 |
| Moisture Absorption 24 h [%] (2) | / | / |
| Moisture Absorption 7 day [%] (2) | / | / |
| Moisture Absorption 4 weeks [%] (2) | / | / |
| Heat Deflection Temperature (0,45MPa) | 55 | ISO 75 |
| Tensile Yield Strength Filament [MPa] | 60 | ISO 527-1 |
| Explain | ||
| (1) 2.16kg; 210℃ | ||
| (2) 28℃; humidity: 37% |
Mechanical Strength of PLA Standard Printed Objects
| Property / Print Direction | Horizontal | Vertical X,Y Axis | Vertical Z Axis | Method |
| Tensile Modules [GPa] | / | / | / | ISO 527-1 |
| Tensile Yield Strength [MPa] | 60 | / | / | ISO 527-1 |
| Elongation at Yield Point [%] | 3 | / | / | ISO 527-1 |
| Impact Strength Charpy (2) [kJ/m2 ] | 24 (no notch) | / | / | ISO 527-1 |
| (1) 1. Used Printer Type 2. Used Slice Software 3. Slice Parameter, Layer Height, Fill Ratio Printing Speed, Top Layer Number, Bottom Layer Number | 1. Eryone Thinker SE/ER-20 2.Cura/Prusa Slicer 3.205℃， 0.2mm,100%,50mm/s, 5,5 | / | / | |
| (2) Charpy unnotched, edgewise direction of flow according to ISO 179-1 | / | / | / | Place it according to the left picture, use slice software and print it |
